Make Perfect Yorkshire Puddings Every Time with this Traditional Recipe (2024)

FAQs

What is the secret to making Yorkshire puddings rise? ›

There is a secret to every Yorkshire pudding recipe when it comes to getting Yorkshire puddings to rise properly. In fact there are two. The first is to let the batter rest once you've mixed and the second is to heat your tin and beef dripping so it's piping hot when you do pour the batter in.

As a first course, it can be served with onion gravy. For a main course, it may be served with meat and gravy, and is part of the traditional Sunday roast, but can also be filled with foods such as bangers and mash to make a meal.

Use a fat that will get hot enough to puff up the yorkies. Olive oil isn't the best choice, but sunflower or vegetable oil reach a higher temperature, which is essential for achieving the maximum reaction when the batter is added.

Yorkshire Pudding Theory #5: Add Water for Crisper Puddings

Again, this was a simple matter of adding water while keeping the ratio of liquid to flour the same. As expected, puddings with more water in them rise up puffier and crisper.

Cold batter and hot oil are the successful combination for a well risen and crisp pudding. Make sure your Rapeseed Oil is smoking hot before pouring your batter into the tin. It's the best oil for the job.

For Yorkshire puddings to soar, the temperature must too – so never open the oven door when they are cooking, to keep the oven as hot as possible. If opening the oven door is absolutely essential your Yorkshire puddings won't be ruined, but they just won't rise as much as they should.

History. The popover is an American version of Yorkshire pudding and similar batter puddings made in England since the 17th century, The oldest known reference to popovers dates to 1850. The first cookbook to print a recipe for popovers was in 1876.

It is almost always because the oil wasn't hot enough. Yorkshire Puddings rise because the water molecules in the milk turn to steam and as they rise, they force the batter upwards to make the puddings grow.

The fat isn't hot enough (it should be smoking hot). The oven isn't getting hot enough (needs to maintain a 220C/425F temperature). Your oven loses heat too quickly when you open the oven door and/or you leave the oven door open for too long whilst you're filling up the Yorkshire pudding tins with batter.

The best way to know whether or not you have the perfect consistency is to dip a spoon into the batter and see if the batter creates a thin layer on the back of the spoon. If the batter falls off, then it's too thin and if a lot of the batter stays on the spoon, it's too thick.

Should Yorkshire pudding batter be thick or runny? ›

What consistency should Yorkshire pudding mix be? For perfect Yorkies, you need a consistency of heavy cream, so really quite runny but not milk-runny. To make sure you achieve this I suggest pouring half of the liquid in and then slowly adding more until you reach the consistency.

This is about the oil. As mentioned, you need the oil to be very hot before adding your batter, but it's also important to use the right amount. Too much will make the bottom of your Yorkshires greasy, while too little could see your puds stick to the pan.

If you want to go Instagram-ready with sky-high fluffy Yorkshires, add an extra egg white to your batter. They'll tower over the competition. With that in mind, always make sure your Yorkshire puddings have room to rise in the oven.

And room temperature batter is ideal

Room temperature vs cold batter: if your batter is at room temperature when it hits the hot pan, you will get a better rise with a crispier hollow pudding. If your batter is cold, your Yorkshires will be slightly more dense inside but with that perfect gravy-pooling cup shape.

I think everyone has or will make at least one flat Yorkshire pudding at some point. The most common reason is that it isn't hot enough. Sometimes because the oven door is open too long or the pan or fat isn't hot enough before the batter is added.

A common fault that results in flat yorkshires is not having things hot enough. The oven needs to be very hot, and you need to use a metal dish with fat or oil that is hot enough to sizzle when you pour the mixture in. Get it straight into the oven and do not open the door for the duration of the cooking time.

The oven isn't getting hot enough (needs to maintain a 220C/425F temperature). Your oven loses heat too quickly when you open the oven door and/or you leave the oven door open for too long whilst you're filling up the Yorkshire pudding tins with batter. Too much batter or not enough fat in the tin.

Sometimes because the oven door is open too long or the pan or fat isn't hot enough before the batter is added. Sometimes it's because there is too much batter in the pan, sometimes because the pan is too large for the quantity of batter, and sometimes because the pan isn't deep enough.

One of the main reasons why Yorkshires don't rise is because the oil isn't hot enough, so make sure it's bubbling and sizzling as you pour your batter in. Make sure you aren't over-filling the tin – fill each hole about a third or halfway up, any more and they may collapse through the weight of batter.